Unmanaged Switches
SP1C-8T-GB PROFINET Industrial Ethernet Switch
8-port Gigabit PROFINET industrial Ethernet switch with IEEE 802.1p priority support, broadcast storm suppression and dual DC power inputs for industrial network expansion.
Key Features
- 8 × RJ45, 10/100/1000 Mbit/s auto-negotiation
- PROFINET series with IEEE 802.1p priority support
- Broadcast storm suppression controlled by DIP 1
- 9 to 56 V DC, dual power inputs supported
- Operating temperature -40 to +80 °C, IP40 protection
- Metal housing, fanless, 35 mm DIN rail or wall mounting
Description
SP1C-8T-GB is part of the SP1C PROFINET series. It provides 8 RJ45 ports with 10/100/1000 Mbit/s auto-negotiation, store-and-forward switching, automatic full/half-duplex detection and auto MDI/MDI-X. IEEE 802.1p priority support is provided for port expansion in industrial PROFINET networks.
Dual 9 to 56 V DC inputs are supported, with overcurrent and reverse-polarity protection. The operating temperature range is -40 to +80 °C. The metal IP40 housing uses passive cooling and supports 35 mm DIN rail or wall mounting.
Specifications
Product Series
SP1C PROFINET Series
Device Type
Unmanaged industrial Ethernet switch
Port Configuration
8 × RJ45 (2 × 4 layout)
Port Speed
10/100/1000 Mbit/s, auto-negotiation
IEEE Standards
IEEE 802.3, 802.3u, 802.3ab, 802.1p
Priority Support
IEEE 802.1p
Switching Method
Store-and-forward
MAC Address Table
4 K entries
Packet Buffer
1.5 Mbit
Switching Capacity
16 Gbit/s
Switching Latency
≤ 7 μs
Port Auto-Detection
Automatic speed and full/half-duplex detection; auto MDI/MDI-X
DIP Switches
DIP 1: broadcast storm suppression; DIP 2: reserved
Input Voltage
9 to 56 V DC
Power Connector
Pluggable terminal block
Redundant Power Inputs
Dual power inputs supported
Overcurrent Protection
Built-in 4.0 A overcurrent protection
Reverse-Polarity Protection
Supported
Operating Temperature
-40 to +80 °C
Storage Temperature
-40 to +85 °C
Relative Humidity
5% to 95%, non-condensing
ESD Immunity
IEC/EN 61000-4-2: ±8 kV contact, ±15 kV air
Radiated RF Immunity
IEC/EN 61000-4-3: 10 V/m (80 to 1000 MHz)
EFT Immunity
IEC/EN 61000-4-4: power ±4 kV, Ethernet ±2 kV
Surge Immunity
IEC/EN 61000-4-5: power and Ethernet ±4 kV (CM) / ±2 kV (DM)
Conducted RF Immunity
IEC/EN 61000-4-6: 3 V (10 to 150 kHz); 10 V (150 kHz to 80 MHz)
Common-Mode Immunity
IEC/EN 61000-4-16: 30 V continuous / 300 V for 1 s
Mechanical Tests
Shock: IEC 60068-2-27; free fall: IEC 60068-2-32; vibration: IEC 60068-2-6
Housing Material
Metal housing
Ingress Protection
IP40
Mounting
35 mm DIN rail or wall mounting
Cooling
Passive cooling, fanless
Dimensions (W × H × D)
44 × 105 × 80 mm